BCDC Core 40A DC to DC In-Cabin Battery Charger 12V

Brand

REDARC REDARC
$499.00
Dispatched in 1-3 business days
SKU
BCDCN1240

In-Cabin 12V 40A DC to DC battery charger with Solar. Lithium Compatible.

BCDC Core In-Cabin 40A DC Battery Charger

FEATURES

  • Suitable for in-cabin and canopy installations only
  • Compact form factor
  • Simultaneous DC and solar charging with Green Power Priority
  • Maximises the performance and life of your auxiliary battery
  • Suits 12V/24V standard and variable voltage/smart alternators
  • Suitable for AGM, GEL, standard lead acid, calcium and Lithium (LiFePO4) batteries
  • Suitable for use on vehicles with conventional alternator charging systems

SPECIFICS

BATTERY CHEMISTRY Standard Lead Acid, Calcium content, Gel, AGM or LiFePO4 type only
CONTINUOUS RATING 40A
POWER TYPE - AC DC DC TO DC
NO LOAD CURRENT <100mA
SOLAR INPUT VOLTAGE 9 - 32V
SOLAR SWITCH ON VOLTAGE 9V
STANDBY CURRENT <8mA
OPERATING TEMPERATURE -15°C to 80°C
WEIGHT 900g
HEIGHT 37 mm
WIDTH 120 mm
DEPTH | LENGTH 165 mm
WARRANTY 2 Years
CONNECTOR TYPE Bare wire
INPUT VOLTAGE 9 - 32V
OUTPUT VOLTAGE 12V DC
MAX. CHARGING VOLTAGE 15.3V
MAX. RATED OUTPUT CURRENT 40A
NOMINAL OUTPUT POWER 600W
INPUT FUSE RATING 60A (Not supplied) REDARC FK60 recommended
OUTPUT FUSE RATING 60A (Not supplied) REDARC FK60 recommended

The BCDC Core 40A DC to DC In-Cabin Battery Charger from REDARC represents the next stage in the evolution of the renowned BCDC platform, a trusted companion for off-grid adventures spanning over a decade.

Tailored for in-cabin, canopy, or battery box setups where dust and weatherproofing are not essential, the BCDC Core incorporates REDARC's proven dual-input DC charging technology, along with an MPPT solar regulator and Green Power Priority, all within the compact and familiar BCDC design. These features enable the BCDC Core to efficiently charge from both the alternator and solar sources simultaneously, ensuring optimal charge capacity in any scenario.

If you're in search of a DC-DC Charger for an under-bonnet installation, consider exploring the REDARC BCDC Classic range, available in 25amp, 40amp, and 50amp models.

MAXIMUM CHARGE EFFICIENCY

Equipped with a Maximum Power Point Tracking (MPPT) solar regulator and 'Green Power Priority,' the BCDC Core achieves simultaneous charging from both solar and the alternator. This maximizes the charge rate while minimizing the load on your alternator, leading to fuel savings.

COMPACT & SILENT

The BCDC Core, with its compact design and absence of loud fans or relays, can be discreetly placed, preserving the aesthetic of your cabin interior. Conceal it under the rear floor, behind a side panel, or under the seats, seamlessly integrating it into your power setup.

LITHIUM READY

Featuring charging profiles tailored to specific chemistries, including lithium, the BCDC Core guarantees that your batteries are prepared for your upcoming adventures. The BCDC Core's award-winning technology has undergone independent verification and testing to ensure the maximization of battery life, reliably charging your battery to a confirmed 100%.*

As a reference, the BCDC Core 40A is typically employed for lead-acid battery banks exceeding 200Ah and lithium batteries surpassing 100Ah. It is crucial to consult your battery manufacturer's data and confirm that the 'Continuous Current Rating' of the charger aligns with the manufacturer's recommended maximum charging current. For smaller batteries, REDARC recommends the BCDC Core 25A.

*Large-capacity battery banks may require several cycles to reach a full charge.

BACKED BY THE BEST

Designed, tested, and manufactured in Australia, the BCDC Core is supported by our leading technical assistance and the nationwide REDNetwork certified installer network.

When venturing into the bush, trust REDARC to ensure a safe journey there and back again.

More Information
OEM Part Number BCDCN1240
UPC 9338628007042
Brand REDARC
Condition Brand new
Country of Manufacture Australia
Write Your Own Review
You're reviewing:BCDC Core 40A DC to DC In-Cabin Battery Charger 12V
Universal Product

Note:

There are no notes for this product

 

WARNING: It must be ensured that all the requirements of the vehicle manufacturer for changes to and retro-fitting on the vehicle and / or cooling system for the operation with a trailer are carried out.
NOTE: We strongly recommend profesional installation for our wiring kits. Only qualified companies may install the electrical system for the trailer hitch. Improper assembly may result in a serious accident hazard!