Dyno run AFR test printouts 4WD 4x4 AWD
Dyno run - without power limit - we can measure power in any car. Car will be weighten on the Race scales before the dyno run.
We check the AFR (Air-Fuel ratio) during the test, we will advise if the current tune is safe. Printout provided with every dyno run.
4WD 4x4 AWD RWD FWD dyno AFR test check power run printout
Dyno run - without power limit - we can measure power in any car. Car will be weighted on the Race scales before the dyno run.
We check the AFR (Air-Fuel ratio) during the test, we will advise if the current tune is safe. Printout provided with every dyno run.
The DYNOMET portable dyno can measure:
- power and torque
- any acceleration (0-100 km/h, 0-160 km/h, 80-120 km/h etc.)
- 1/4 mile time and speed
- braking distance
The sensor has a resolution of 60 impulses per one revolution allowing for precise measurements.
The DYNOMET portable dyno has many advantages:
precision: if the weight and wheel circumference are correct, the margin of error is less than 1%
the vehicle is tested in its natural environment, with perfect cooling of all crucial components, which can be a problem while testing in a workshop,
the software was developed with road tests in mind - to perform a standard power test usually around 800 meters of relatively straight road is required.
The DYNOMET software allows comparison of up to 4 graphs and has in-built DIN70020 temperature and air pressure compensation.
Advantages over a standard roller set dyno:
- no maximum power limit
- the DYNOMET portable road dyno will measure any power as long as an adequate stretch of road is available
- ability to test vehicle's acceleration
- tests cars in their natural environment
- tests 4x4, AWD, RWD, FWD cars
| OEM Part Number | DYNO |
|---|
Note:
WARNING: It must be ensured that all the requirements of the vehicle manufacturer for changes to and retro-fitting on the vehicle and / or cooling system for the operation with a trailer are carried out.
NOTE: We strongly recommend profesional installation for our wiring kits. Only qualified companies may install the electrical system for the trailer hitch. Improper assembly may result in a serious accident hazard!